Nice utiltiy, main purpose is injecting drivers to an existing windows on harddisk.
BUT, i tried some different things and got interesting results, hoping you will get interested, here is my test.
A) using this utility to add driver to Pe1 after Pe1 boot.With BartPE:
1) i put DP_MassStorage_wnt5_x86-32_805.7z and DP_LAN_wnt5_x86-32_8053.7z files to usb to an empty folder.
2) i put no drivers to bartpe, created with pebuilder and put it in a .img file which have about 100mb free space in it.
3) i started pc with this .img file (from usb, ramdisk.sys etc)
*) so now nor the ethernet neither any of the hardisks were seen by bartpe (jmicron raid0, ich8 ahci)
4)with DriverForge,
in compressed section show the location folder of DP_MassStorage_wnt5_x86-32_805.7z and DP_LAN_wnt5_x86-32_8053.7z files.
in extaction X:\i386\system32\drivers
and started. (after finish i closed DriverForge)
5) I started Hwpnp utility (force and install drivers)
6) I used a utility to mount the disks that are found automatically. (MountStorPe.exe )
7) i started net support.
valaaaa
. now i can reach ich8 ahci connected disk from a43 and can connect the internet .
so this utility solves half of the problem i wrote here:
Adding driver after boot (not before) ?, all mass storage drivers may not be in livexpBut in BartPE i coulnt reach jmicron raid0 disks.
with BartPE, i got 2 same error sceens when using DriverForge
Title: Device installer error
Text: windows could not load the installer for DiskDrive. Contact your hardware vendor for assistance.
also with BartPE when drivers was installing, signature verification was asked and i choose continue. (for realtek and jmb)
ps: i also tried using single drivers for my mainboard instead of dps packages, they worked nicely too.
LiveXP:
in fact i tried first this idea with LiveXP
When i used DriverForge an error came with: sfc.dll , syssetup.dll not found.
and instead of hwpnp i try to use LiveXP device manager, and search for new device.
non of disks nor ethernet were found.
it seems to me that this utility can be the answer for "Adding driver after boot to livexp"
before trying new things (it takes lottts of time) i wrote here so maybe new ideas can come.
Using this utility to add drivers to livexp: Failed and no need to mentione now, A) is more important.
ps: you can get MountStorPe from here:
http://www.kare-net.de/Plugins.htm
Jul 26 2008, 02:22 AM
Tips For 
problems of WinBuilder, Cryptic codes, syntax rules fakingly mismatching working lines, not having even basic fundemantal syntax rules and mostly 'lies' and 'post games'.
